| Abstract | The National research council Canada conducted three major fire resistance studies on the interior party walls, interior fire separation walls and exterior walls. The fire resistance results of these studies were published over the past three decades and the publications were short in suggesting design guidelines for practioners’ use and gaps for future research. This paper summaries the fire resistance results of 35 full-scale wall tests, suggests design guidelines and identifies future research gaps for interior party walls, interior fire separation walls and exterior walls. The result summary includes the effect of different design parameters on the fire resistance performance of wall assemblies such as the stud type and spacing, number of stud rows, number of gypsum board layers and thickness, mid-height blocking, resilient channels installation and spacing, screws spacing for attaching gypsum board to either wall faming or resilient channels, insulation type and exterior wall sheathing type on the fire resistance of loadbearing and non-loadbearing wall assemblies. The summary results was used as the basis for suggesting design guidelines for practioners’ use and identifying gaps for future research to improve the fire resistance performance of wall assemblies. For example, the use of a reduced screw spacing from 406 mm o.c. to 203 mm o.c. in the gypsum board field and from 406 mm o.c. to 150 mm o.c. at the board joints was suggested for future research to keep the protective gypsum board layer attached to studs or resilient channels longer for a better fire resistance performance of wall assemblies. Also, fire resistance design guidelines are suggested, for examples, the use of rock fibre insulation for non-load bearing interior party walls to achieve 1.5-h fire resistance, the use of cellulose fibre insulation for loadbearing fire separation walls to achieve 2-h fire resistance rating and the use of reduced screw spacing in attaching the gypsum board to wall framing from 406 mm o.c. to 203 mm o.c. for loadbearing exterior wall assembly with gypsum board glass mat sheathing to expand the fire resistance rating from non-useful 30-min to a useful code compliance 45-min fire resistance rating assembly. Additional suggested examples for future research gaps and design guidelines are also provided. |
|---|
