| DOI | Trouver le DOI : https://doi.org/10.1007/s00340-006-2194-1 |
|---|
| Auteur | Rechercher : Liu, F.1Identifiant ORCID : https://orcid.org/0000-0002-1790-6381; Rechercher : Daun, K. J.1; Rechercher : Snelling, David1; Rechercher : Smallwood, Gregory1Identifiant ORCID : https://orcid.org/0000-0002-6602-1926 |
|---|
| Affiliation | - Conseil national de recherches Canada. Institut de technologie des procédés chimiques et de l'environnement du CNRC
|
|---|
| Format | Texte, Article |
|---|
| Sujet | Laser-induced incandescence; nano-particles; particle conduction; heat loss; Monte Carlo modelling; McCoy and Cha model; Fuchs boundary-sphere model |
|---|
| Résumé | Laser-induced incandescence (LII) of nano-second pulsed laser heated nano-particles has been developed into a popular technique for characterizing concentration and size of particles suspended in a gas and continues to draw increased research attention. Heat conduction is in general the dominant particle cooling mechanism after the laser pulse. Accurate calculation of the particle cooling rate is essential for accurate analysis of LII experimental data. Modelling of particle conduction heat loss has often been flawed. This paper attempts to provide a comprehensive review of the heat conduction modelling practice in the LII literature and an overview of the physics of heat conduction loss from a single spherical particle in the entire range of Knudsen number with emphasis on the transition regime. Various transition regime models developed in the literature are discussed with their accuracy evaluated against direct simulation Monte Carlo results under different particle-to-gas temperature ratios. The importance of accounting for the variation of the thermal properties of the surrounding gas between the gas temperature and the particle temperature is demonstrated. Effects of using these heat conduction models on the inferred particle diameter or the thermal accommodation coefficient are also evaluated. The popular McCoy and Cha model is extensively discussed and evaluated. Based on its superior accuracy in the entire transition regime and even under large particle-to-gas temperature ratios, the Fuchs boundary-sphere model is recommended for modeling particle heat conduction cooling in LII applications. |
|---|
| Date de publication | 2006-04-19 |
|---|
| Maison d’édition | Springer |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro du CNRC | NRCC 50946 |
|---|
| Numéro NPARC | 3538026 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | c92bec30-9fdf-4a77-bc7f-2b6d91889b37 |
|---|
| Enregistrement créé | 2009-08-27 |
|---|
| Enregistrement modifié | 2025-11-12 |
|---|
