| DOI | Trouver le DOI : https://doi.org/10.1175/1520-0426(1993)010<0629:IAPUAH>2.0.CO;2 |
|---|
| Auteur | Rechercher : Colbourne, E. B.; Rechercher : Helbig, J.; Rechercher : Cumming, D. |
|---|
| Format | Texte, Article |
|---|
| Sujet | ADCP; fairing |
|---|
| Résumé | This paper presents the results of the design and testing of a hydrodynamic mount for a direct-reading 150 kHz acoustic Doppler current profiler (ADCP) operated over the side of a small inshore vessel in transect mode (i.e., while steaming). The mount consists of a symmetric wing section encompassing the ADCP pressure housing and a custom teardrop-shaped fairing surrounding the transducer heads. It was found that the longitudinal (along-ship) force resulting from the form drag and the wave generation on the hydrodynamic mount was less than one-half of that on the unfaired ADCP. This together with improved flow characteristics resulted in a reduction in the standard deviations of the measured currents from 6 to 10 cm s/sup -1/ during a survey in 1990 without the fairing to 3-5 cm s/sup -1/ for a survey in 1991 with the fairing. The mount also permitted a doubling in ship speed from about 2.0 to 4.0 m s/sup -1/ (4-8 kt). The results also indicate the minimum noise levels that can be expected at the spatial resolutions usually required in inshore regions. |
|---|
| Date de publication | 1993 |
|---|
| Dans | |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Identificateur | IR-1992-04 |
|---|
| Numéro du CNRC | 5403 |
|---|
| Numéro NPARC | 8894973 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | c2c0c152-63ff-4ad9-ba01-b611335331e8 |
|---|
| Enregistrement créé | 2009-04-22 |
|---|
| Enregistrement modifié | 2020-04-24 |
|---|
