| Auteur | Rechercher : Roy, Steven1; Rechercher : Yousefpour, Ali1; Rechercher : Bednar, Felix; Rechercher : Beaulieu, Pete |
|---|
| Affiliation | - Conseil national de recherches du Canada. Aérospatiale
|
|---|
| Format | Texte, Article |
|---|
| Conférence | 70th American Helicopter Society International Annual Forum, May 20-22, 2014, Montréal, Québec |
|---|
| Sujet | Carbon fibers; Curing; Helicopters; Hydraulic machinery; Molds; Bulk molding compounds; Dimensional inspection; Improved process; Manufacturing cost; Material distribution; Pre-impregnated fabrics; Processing method; Thickness uniformity; Compression molding |
|---|
| Résumé | Composite helicopter tailboom frames were manufactured by compression molding using a carbon fiber thermoset bulk molding compound. A mold was designed for compression molding and installed in a hydraulic press. The mold features two shear edges, guide pins and an integrated part ejection system. A material preforming method was developed to improve consistency in material distribution, which improved process robustness. A number of parts were produced and inspected for void content and dimensional stability. No significant porosity or voids were found in the samples examined. Part thickness uniformity was studied and improved, in order to meet the required tolerances. Dimensional inspection before and after a free standing post cure showed no significant part distortion. This work showed that compression molded tailboom frames are a viable alternative to current tailboom frames using continuous pre-impregnated fabric materials and cured by autoclave. This alternate processing method has the potential to reduce touch time and manufacturing costs. |
|---|
| Date de publication | 2014-05-22 |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro NPARC | 21275930 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | bef18d0e-87ae-45a0-b63b-a7d323389cbd |
|---|
| Enregistrement créé | 2015-08-10 |
|---|
| Enregistrement modifié | 2020-04-22 |
|---|
