| Auteur | Rechercher : Landek, Darko Jačan, Jurica; Rechercher : Štefok, Mislav; Rechercher : Yang, Qi1 |
|---|
| Affiliation | - Conseil national de recherches Canada. Aérospatiale
|
|---|
| Format | Texte, Article |
|---|
| Conférence | 12th International Conference on Mechanical Technologies and Structural Materials, MTSM 2023, September 21-22 2023 |
|---|
| Sujet | 100Cr6 calotest; PACVD; PVD; residual stresses; TiN; XRD analysis |
|---|
| Résumé | The paper compares the residual stresses on TiN coatings applied to a substrate of hardened and tempered 100Cr6 steel by physical vapor deposition (PVD) and plasma-assisted chemical vapor deposition (PACVD) from the vapor phase. In both procedures, a TiN coating with a thickness of 1-2 m was applied to equally prepared substrate samples. The samples were tested for the permeability of the coating according to the VDI 3822:2011standard, the thickness was determined by the calotest and the residual stresses were analysed by the X-ray diffraction (XRD) method. The coating applied by the PVD process showed better adhesion and three times lower residual stresses compared to the coating applied by the PACVD process. On both coatings, the residual stresses are lower compared to uncoated samples in the hardened and tempered state. |
|---|
| Date de publication | 2023-09-21 |
|---|
| Maison d’édition | Croatian Society for Mechanical Technologies |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | affb7e0a-796c-4069-8d5b-a505f4362e50 |
|---|
| Enregistrement créé | 2024-11-26 |
|---|
| Enregistrement modifié | 2024-11-26 |
|---|
