| Téléchargement | - Voir le manuscrit accepté : High-performance PM steels utilizing extra-fine nickel (PDF, 11.8 Mio)
|
|---|
| Auteur | Rechercher : Azzi, Lhoucine1; Rechercher : Stephenson, Tom; Rechercher : Pelletier, Sylvain1; Rechercher : St-Laurent, S. |
|---|
| Affiliation | - Conseil national de recherches Canada. Institut des matériaux industriels du CNRC
|
|---|
| Format | Texte, Article |
|---|
| Résumé | Distribution of the alloying additives in powder metallurgy (PM) steels is a key element in achieving optimum sintered properties. Segregation must be avoided in order to ensure consistent part-to-part properties. Recent studies indicate that extra-fine nickel powders have a beneficial impact on the overall properties of nickel-copper-carbon PM steels. Therefore, the use of extra-fine nickel powder in segregation-free PM mixes could be an efficient way to optimize properties. To this end, the effect of the size and size distribution of two nickel powders on the physical and mechanical properties of two binder-treated steel powder premixes processed on a polit scale has been assessed. The properties of these two mixes are compared with those of a diffusion-alloyed mix of the same composition. Mechanical properties and dimensional change of the binder-treated mixes are shown to be superior to those of the diffusion-alloyed mix. The physical and sintered properties of the binder-treated mixes can be further improved by using extra-fine nickel powder (D₅₀ 1.5µm) instead of a standard size (D₅₀ 8µm) nickel powder. |
|---|
| Date de publication | 2007-01-01 |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro du CNRC | NRCC 52425 |
|---|
| Numéro NPARC | 13958433 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | 942aa012-f925-4491-8089-1d951cc74c8f |
|---|
| Enregistrement créé | 2009-12-18 |
|---|
| Enregistrement modifié | 2020-05-10 |
|---|
