| Résumé | This paper demonstrates the benefits of leveraging free-space optics concepts in the design of certain integrated photonic components, leading to a footprint reduction without compromising on performance. Specifically, we present ultra-short, highly efficient and fabrication-friendly mode-size converters based on metamaterial Fresnel lens-assisted tapers. This is achieved using a parameterized inverse-design approach, where the metamaterial phase shifters are realized using fabrication-friendly Manhattan geometries, by optimizing the width, length, and position of the phase shifters. This approach overcomes the limitations of the conventional method that uses local periodic approximation, which is not suitable for lenses with a short focal length and high numerical aperture. We also extend the free-space concept of compound lenses and demonstrate a doublet-based taper to further reduce the footprint. The devices are fabricated and experimentally characterized in terms of insertion loss and signal integrity at high data transmission rates, exhibiting high performance. For the singlet, it effectively achieves mode-size conversion from 15 μm to 0.5 μm within a 15 μm distance, leading to ×10 length reduction compared to a linear taper. The insertion loss is under 1 dB over the entire C-band. The doublet achieves the same mode-size reduction within a 10 μm distance, leading to ×15 length reduction compared to a linear taper. The insertion loss is near 1 dB over most of the C-band. In both cases, the signal integrity is maintained for up to 50 Gbit/s. |
|---|
