| DOI | Trouver le DOI : https://doi.org/10.1109/APUSNCURSINRSM.2017.8073265 |
|---|
| Auteur | Rechercher : Aflaki, Pouya1; Rechercher : Xiao, George1; Rechercher : Taeb, Aidin; Rechercher : Ye, Tao1; Rechercher : Py, Christophe1 |
|---|
| Affiliation | - Conseil national de recherches Canada. Technologies de l'information et des communications
|
|---|
| Format | Texte, Article |
|---|
| Conférence | 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, July 9-14, 2017, San Diego, CA, USA |
|---|
| Résumé | In this paper an optimally designed corner trimmed microstrip UHF reader antenna fabricated using screen printing of silver ink on an FR4 substrate is presented. The reader antenna, 12×12 cm 2 in size, is fed through a single microstip line with an SMA connector attached to the antenna board. The measured results demonstrate reflection coefficient better than -15 dB as well as 3dB-beamwidth greater than 60° over the 900 MHz-930 MHz frequency bandwidth. The measured axial ratio lower than 3 dB within the range of 910 MHz-920 MHz shows the antenna polarization is circular in this frequency range. The designed antenna is light, low-cost and easy to manufacture and therefore can be conveniently used as reader antenna in RFID retail monitoring applications. |
|---|
| Date de publication | 2017-07 |
|---|
| Maison d’édition | IEEE |
|---|
| Dans | |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro NPARC | 23004208 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | 5654ac2c-5984-4605-b490-cff0f461fa45 |
|---|
| Enregistrement créé | 2018-10-11 |
|---|
| Enregistrement modifié | 2020-03-16 |
|---|
