Téléchargement | - Voir le manuscrit accepté : Cold sprayability of mixed commercial purity Ti Plus Ti6Al4V metal powders (PDF, 1.3 Mio)
|
---|
DOI | Trouver le DOI : https://doi.org/10.1007/s11666-017-0528-7 |
---|
Auteur | Rechercher : Aydin, Huseyin; Rechercher : Alomair, Mashael; Rechercher : Wong, Wilson; Rechercher : Vo, Phuong1; Rechercher : Yue, Stephen |
---|
Affiliation | - Conseil national de recherches du Canada. Automobile et les transports de surface
|
---|
Format | Texte, Article |
---|
Sujet | cold spray; deposition efficiency; mixed metal powders coating; porosity |
---|
Résumé | In the present work, metallic composite coatings of commercial purity Ti plus Ti6Al4V were produced by cold spraying to explore the effect of mixing on porosity and mechanical properties of the coatings. The coatings were deposited using N2 gas at 800 °C and 4 MPa pressure on 1020 steel substrate. Coating characteristics were studied by examining porosity percentages and Vickers’s hardness. The microstructure was examined using optical and electron microscopy techniques. It was observed that mixing metal powders can lead to improvements in cold sprayability, specifically decreases in the porosity of the ‘matrix’ powder. It is shown that a critical addition can significantly influence porosity, but above this critical level, there is a little change in porosity. Hardness differences between the two powders are considered to be the first-order influence, but differences in particle sizes and morphology may also be contributing factors. |
---|
Date de publication | 2017-01-30 |
---|
Maison d’édition | Springer |
---|
Dans | |
---|
Langue | anglais |
---|
Publications évaluées par des pairs | Oui |
---|
Numéro NPARC | 23001440 |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | 53276dc7-145e-4573-992c-69907204c40e |
---|
Enregistrement créé | 2017-02-08 |
---|
Enregistrement modifié | 2020-06-04 |
---|