| Résumé | Incomplete labeling of proteins by a derivatizing reagent usually results in the formation of a large number of products, which can produce unacceptable band broadening during electrophoretic analysis. In this paper, we report on the reaction of the fluorogenic reagent 5-furoylquinoline-3-carboxaldehyde (FQ) with the lysine residues of ovalbumin. Mass spectrometry was first used to determine the distribution in the number of labels attached to the protein. At room temperature, 3.6±1.9 labels were attached after 30 min. The reaction rate and number of labels increased at elevated temperatures. At 65 °C, 6±2.5 labels were attached after 5 min. The apparent activation energy for this reaction is estimated as 48±17 kJ/mol. Based on the mass spectrometry study, the labeling reaction was assumed to consist of two steps. In the first, the protein unfolds to make lysine residues accessible. In the second, the reagents react with the ε-amine of the lysine residues. To test this hypothesis, submicellar capillary electrophoresis and laser-induced fluorescence were used to characterize the reaction mixture. The apparent activation energy was measured for the labeling reaction; the apparent activation energy was 57±12 kJ/mol for reaction performed in the separation buffer. Denaturing agents were added to the reaction mixture. The addition of 2 M thiourea with 6 M urea to the reaction resulted in a modest decrease in the apparent activation energy to 42±2 kJ/mol. The addition of 2.5 M or higher concentration of ethanol decreased the apparent activation energy to 32±2 kJ/mol. We conclude that the apparent activation energy for protein labeling is dominated by denaturation of the protein, and that the addition of suitable denaturing reagents can eliminate this contribution to the reaction chemistry. |
|---|
