Sélection de la langue

Gouvernement du Canada / Government of Canada

Recherche

Naturally occurring halloysite nanotubes for enhanced durability of natural rubber/ethylene propylene diene monomer rubber vulcanizate

Par Conseil national de recherches du Canada

DOITrouver le DOI : https://doi.org/10.1002/vnl.21856
AuteurRechercher : ; Rechercher : 1Identifiant ORCID : https://orcid.org/0000-0002-0611-4717; Rechercher : ; Rechercher : ; Rechercher : Identifiant ORCID : https://orcid.org/0000-0001-9055-6202; Rechercher :
Affiliation
  1. Conseil national de recherches Canada. Construction
FormatTexte, Article
Sujetdurability; dynamic properties; halloysite nanotubes; microstructure; ozone resistance; rubber nanocomposites
Résumé
A facile approach of using halloysite nanotubes (HNTs) was proposed to address the durability performance demands of natural rubber (NR)/ethylene propylene diene monomer rubber (EPDM) blends and to protect them from the deleterious effects of the service environment including ozone, chemicals, abrasion, and cyclic loading. The introduction of HNTs substantially improved the stability of NR/EPDM when exposed to ozone (over fourfold enhancement with the addition of 5 phr HNTs). Moreover, the HNT-filled NR/EPDM vulcanizates offered approximately 66% reduction in the solvent-mediated swelling in comparison to the unfilled sample. Fatigue life studies showed that the HNT-reinforced NR/EPDM composite could withstand 30% more cycles to failure than the un-reinforced NR/EPDM blend. The effect of various HNT loading on the morphological, mechanical, physical, and rheological properties of nanocomposite vulcanizates based on NR/EPDM was also investigated. The morphological investigations revealed that the introduction of HNT into the NR/EPDM rubber matrix caused a rough morphology in fracture surface and a well-dispersed structure was obtained with the addition of up to 5 phr of HNTs. These findings were further supported by rheological, mechanical, and thermodynamical results.
Date de publication
Maison d’éditionWiley
Society of Plastics Engineers
Dans
  • Journal of Vinyl and Additive Technology 27, nº 4 (novembre 2021) : 855–867.
Langueanglais
Publications évaluées par des pairsOui
Exporter la noticeExporter en format RIS
Signaler une correctionSignaler une correction (s'ouvre dans un nouvel onglet)
Identificateur de l’enregistrement05fcad31-46b3-4dfe-a2fe-96abfc5793cc
Enregistrement créé2023-01-27
Enregistrement modifié2023-01-27
Date de modification :