Language selection

Government of Canada / Gouvernement du Canada

Search

Cryo-scanning electron microscopy analysis for the structural evolution of cellulose nanocrystals based hydrogels

From National Research Council Canada

Download
  1. (PDF, 745 KiB)
DOIResolve DOI: https://doi.org/10.1093/micmic/ozad067.324
AuthorSearch for: 1; Search for: 1; Search for: 1; Search for: ; Search for: 1; Search for: 1; Search for: 1; Search for: 1
Affiliation
  1. National Research Council of Canada. Nanotechnology
FunderSearch for: National Research Council of Canada; Search for: Alberta Innovates; Search for: Government of Alberta
FormatText, Article
Conference81st Annual Meeting of the Microscopy Society of America / 57th Annual Meeting of the Microanalysis Society, July 23-27, 2023, Minneapolis, Minnesota, USA
Abstract
Cellulose nanocrystals (CNCs) are highly crystalline spindle-shaped particles that have received much attention due to their remarkable properties such as ease of surface functionalization, mechanical properties, bio-sustainability, bio-renewability, relatively lower production cost, and low cytotoxicity [1–2]. Therefore, many studies have been conducted to use these attractive nanomaterials in the matrix of polymer gels (i.e. hydrogel) for improving the gel properties [3–4]. However, the influence of CNCs on hydrogel structure is not yet fully understood since there are two major challenges when examining the structure of CNC-based hydrogels using electron microscopy (EM) technique. First, high water content materials such as hydrogels should be characterized at high vacuum operating conditions but this approach causes the liquid to evaporate, altering the original hydrogel structures during imaging. Due to this phenomenon, freeze dried methods combined with thin-metal coating have been used widely for hydrogel structure analysis using scanning electron microscopy (SEM). The second challenge is that both of the CNCs and the hydrogel have similar electron densities, and therefore poor contrast between the CNCs, polymer network and water prevents the resolution of the individual components. As result, standard EM technique cannot be applied to the hydrogel composite materials [5–6]. Therefore, in order to observe the changes of hydrogel structure with the distribution of CNCs directly without any pretreatment of samples, it is critical to develop the cryo-SEM characterization technique with new sample preparation methods.
Publication date
PublisherOxford University Press
Microscopy Society of America
In
  • Microscopy and Microanalysis 29, no. Supplement 1 (22 July 2023): 660–661.
LanguageEnglish
Peer reviewedYes
NRC numberNRC-NANO-275
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifierfd3622fe-3549-44c6-81db-7d5aebffcb35
Record created2023-08-02
Record modified2023-08-02
Date modified: