Language selection

Government of Canada / Gouvernement du Canada

Search

Weldlines in injection molded polypropylene : effect of filler shape

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1177/073168449000900209
AuthorSearch for: ; Search for: ; Search for: ; Search for: 1
Affiliation
  1. National Research Council Canada
FormatText, Article
Conference42nd Annual Conference of the Society of the Plastics Industry, 1987
Abstract
Weldlines represent potentially fatal sources of weakness in injection molded thermoplastic parts. This is particularly true for filled and reinforced composi tions where usual remedies consisting in a modification of processing conditions such as increase of melt temperature, injection speed, and pressure do not always work. This paper deals with weldline strength of injection molded polypropylene containing spherical and irregularly shaped fillers (glass spheres, calcium carbonate), or reinforcements such as glass flakes and fibers, talc, and mica. Two types of weldline will be considered: weldlines formed when two melt streams meet head-on and those formed as a result of flow around an insert. It will be shown that the loss of strength is greatest in compositions reinforced with flakes and fibers. This is due to flow induced filler orientation in the weldline zone. Approaches to reduce the loss of strength which make use of known flow behavior of suspensions of fibers and flakes will be illustrated.
Publication date
PublisherSage
In
  • Journal of Reinforced Plastics and Composites 9, no. 2: 194–208.
LanguageEnglish
Peer reviewedYes
NRC numberCNRC 33045
NRC-IMI91AP-31000-1196-G
NPARC number23004508
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifierfc2c6a87-f770-4cf6-8e0e-f71d26345e65
Record created2018-11-09
Record modified2020-03-17
Date modified: