Language selection

Government of Canada / Gouvernement du Canada

Search

Texas Instruments calibration procedure

From National Research Council Canada

Alternative titleProcédure pour calibrer un « Texas instruments »
Download
  1. (PDF, 3.7 MiB)
DOIResolve DOI: https://doi.org/10.4224/40003610
AuthorSearch for: 1; Search for: 1
Affiliation
  1. National Research Council Canada. Division of Mechanical Engineering
FormatText, Memorandum
Physical description21 p.
Abstract
This memorandum is intended to be used as a guide for calibrating a Texas Instruments, Model 157, Pressure Standard against a Bell and Howell Primary Pressure Standard. Excerpts from the TI Operation and Maintenance manual have been included in Appendix B. An actual calibration was used for demonstrating the procedure, which included electrical as well as mechanical adjustments. The calibration, ranging from 0 to 100 PSIG, indicates a maximum drift of 0.026% over three years, which is within the manufacturer’s specification.
Publication date
PublisherNational Research Council Canada
Series
  • Laboratory Memorandum (National Research Council Canada. Division of Mechanical Engineering. Engine Laboratory), no. LM-ENG-004 (July 1986).
LanguageEnglish
Peer reviewedNo
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifierf9a37f9d-bf10-410f-a77b-7704d5a725fe
Record created2025-08-20
Record modified2025-11-03
Date modified: