Non-flammable electrolyte mixtures of ringed ammonium-based ionic liquids and ethylene carbonate for high voltage Li-ion batteries

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1149/2.0361410jes
AuthorSearch for: 1 ; Search for: 1 
Name affiliation
  1. National Research Council Canada. Energy, Mining and Environment
FormatText
TypeArticle
Journal titleJournal of the Electrochemical Society
ISSN0013-4651
1945-7111
Volume161
Issue10
PagesA1593–A1601
Abstract
Three ionic liquids based on ringed ammonium cations with different ring sizes [seven: azepanium; six: piperidinium; five: pyrrolidinium] and imide anion mixed with ethylene carbonate, EC, have been evaluated as electrolytes in high voltage lithium-ion batteries. It is found that mixing the ionic liquids with ethylene carbonate gives electrolyte mixtures with lower viscosities, increased conductivities and improved electrochemical cathodic stability than the neat ionic liquids. The flammability and thermal stability of the electrolytes have been studied by open-cup flash point measurements and thermogravimetric analysis combined with Infrared and Mass Spectroscopy. It is found that the neat ionic liquids have good thermal stability above 300°C and no flammability compared to carbonate-based electrolyte but upon mixing with EC the mixture decomposes at temperature below 130°C but stays non-flammable. The electrolyte mixtures have been evaluated in Li/LiMn₁.₅Ni₀.₅O₄ (LMNO) and graphite/Li half cells and in the presence of fluoroethylene carbonate additive. Discharge capacities reaching 112–117 mAh.g⁻¹ and 280–293 mAh.g⁻¹ with coulombic efficiencies of 95% and 99% were obtained for graphite and LMNO, respectively, over 100 cycles at C/12.
Publication date
PublisherThe Electrochemical Society
LanguageEnglish
Peer reviewedYes
NPARC number23000102
Export citationExport as RIS
Report a correctionReport a correction
Record identifiere2ea9425-f653-4fe9-a66d-fd533f61b922
Record created2016-06-02
Record modified2016-06-02
Date modified:
Report a problem on this page