Language selection

Government of Canada / Gouvernement du Canada

Search

In-cycle deterministic and stochastic dynamics of extrusion blow molding

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.3139/217.920257
AuthorSearch for: 1; Search for: 1
Affiliation
  1. National Research Council Canada. NRC Industrial Materials Institute
FormatText, Article
Abstract
Optimization of the thickness distribution in extrusion blow molded parts is crucial to minimize cycle times and resin usage. Closed-loop parison programming can be cycle-to-cycle or in-cycle. Corrective action occurs between cycles for the case of cycle-to-cycle control. However, this control scheme does not correct for high frequency disturbances that enter the system, such as periodic flowrate changes, noise from the gap position transducer, uneven melting and compression of the polymer and uneven inflation.
Publication date
PublisherDeGruyter
In
  • International Polymer Processing 7, no. 3 (1 September 1992): 257–266.
LanguageEnglish
Peer reviewedYes
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifierc7feaeaf-7a48-42cc-834f-b4efc69092ce
Record created2024-05-15
Record modified2024-05-15
Date modified: