Language selection

Government of Canada / Gouvernement du Canada

Search

Galvanic corrosion risk assessment of bolt materials in contact with ASTM A1010 steel bridges

From National Research Council Canada

AuthorSearch for: 1; Search for: 1; Search for: ; Search for: 1
Affiliation
  1. National Research Council Canada. Construction
FormatText, Article
ConferenceCorrosion Conference and Expo 2018, April 15-19, 2018, Phoenix, USA
SubjectA325 galvanized bolts; ASTM A1010 steel; bridge; galvanic coupling corrosion; stainless steel bolts
Abstract
This study has evaluated the galvanic coupling corrosion risk between connection bolt materials with ASTM A1010 structural steel, which has recently emerged for the construction of more corrosion-resistant bridges than weathering steel bridges. Use of A1010 steels containing 10.5% Cr is intended to extend the service life of steel bridges without frequent maintenance requirements caused by corrosion, particularly in regions under severe chloride exposures such as due to heavy use of de-icing salts and in marine environments. The greater corrosion resistance of A1010 steel with a more positive corrosion potential does, however, impose a risk of galvanic corrosion with the connection bolts in direct electrical contact. Here, the galvanic corrosion between A1010 steel and galvanized ASTM A325 Type I bolt was compared to that between weathering steel and galvanized ASTM A325 Type I bolt, as well as that between A1010 steel and ASTM A320 B8 class 2 and A193 B6 stainless steel bolts. A comprehensive experimental investigation measured galvanic coupling current and potential for samples in cells of aerated salt solution, and the galvanic corrosion risk ranking was validated by visual examinations of bolted steel plates exposed to a salt spray testing chamber. The galvanic corrosion risk of using B8 class 2 bolts with A1010 steel was found to be much lower than using galvanized A325 bolts, but B6 bolt material itself experienced severe crevice and pitting corrosion in both simulated salt solution and salt spray testing.
Publication date
PublisherNational Association of Corrosion Engineers International
In
  • Corrosion Conference and Expo 2018.
Series
  • International corrosion conference series.
LanguageEnglish
Peer reviewedYes
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifier99eab861-36d6-42ca-9b40-91a5804a4b0e
Record created2019-04-12
Record modified2020-03-16
Date modified: