Language selection

Government of Canada / Gouvernement du Canada

Search

Split-spectrum processing with finite impulse response filters of constant frequency-to-bandwidth ratio

From National Research Council Canada

DOIResolve DOI: https://doi.org/10.1016/0041-624X(90)90090-B
AuthorSearch for: 1
Affiliation
  1. National Research Council Canada
FormatText, Article
Subjectsplit-spectrum processing; clutter reduction; non-destructive testing; ultrasonic testing; signal processing
Abstract
A limitation to the ultrasonic non-destructive evaluation of materials with coarse structure is the poor signal-to-noise ratio caused by backscattering noise. Split spectrum signal processing, based on the decomposition of the ultrasonic signal by multiple narrow-band filtering, has been proved efficient for the suppresion of such noise. Its application, however, has been limited by the long processing time of the filtering process which uses discrete Fourier transforms. Here a new decomposition method is presented, based on finite impulse response filters of constant frequency-to-bandwidth ratio. This method is more efficient for split-spectrum processing of ultrasonic signals having wide frequency bandwidths or long time duration, and could be implemented in real-time with tapped delay lines. The choice of the optimal processing parameters is discussed theoretically and experimentally verified on ultrasonic data obtained from austenitic steel and graphite-epoxy samples.
Publication date
PublisherElsevier
In
  • Ultrasonics 28, no. 4: 229–240.
LanguageEnglish
Peer reviewedYes
NRC numberNRCC 30134
NRC-IGM89AP-402-861-G
Export citationExport as RIS
Report a correctionReport a correction (opens in a new tab)
Record identifier70ef735f-8c1e-41f0-a2ba-134054fd0067
Record created2020-04-08
Record modified2020-05-08
Date modified: