| Abstract | To reduce the complexity in a nano-optomechanical system a pump and probe scheme using only a single input laser is used to both coherently pump and probe the nanomechanical device. The system operates similarly to the traditional two laser system, but instead of using a constant power to probe the device and a separate, modulated laser to drive it with an optical gradient force, a single laser is utilized for both functions. A model of the measurement scheme’s response is developed which matches the experimental data obtained in the optomechanical Doppler regime and low cavity power limit. As such, the unconventional response still yields useful device information such as the resonant frequency of the device and its mechanical quality factor. The device is driven with low noise and its frequency is tracked using a phase-locked loop. This demonstrates its potential use for dynamic frequency measurements such as nanomechanical inertial mass loading. In such a system, the estimated mass resolution of the device is 6 zg and consistent with other detection methods. |
|---|
