Traceable 3D imaging metrology

From National Research Council Canada

Download
  1. (PDF, 19 MB)
DOIResolve DOI: https://doi.org/10.1117/12.698381
AuthorSearch for: 1; Search for: 1; Search for: 1; Search for: 1; Search for: 1; Search for: 1
Name affiliation
  1. National Research Council Canada. NRC Institute for Information Technology
FormatText
TypeArticle
Proceedings titleVideometrics IX (E1103)
Series titleProceedings of SPIE; no. 6491
ConferenceThe Symposium: Annual IS&T/SPIE on Electronic Imaging, January 28 - February 1, 2007, San Jose, CA, USA
ISSN0277-786X
1996-756X
ISBN0819466042
9780819466044
Subject3D imaging; range cameras; accuracy; resolution; measurement uncertainty; calibration; metrology laboratory; standards; caméras; exactitude; résolution; incertitudes liées aux mesures; étalonnage; laboratoire de métrologie; normes
Abstract
This paper summarizes the causes of uncertainty in 3D data measurement, some basic theory of 3D imaging that explains the origin of some of these causes, and, describes the properties and performances of a 100 square meter facility to perform research in traceable 3D imaging metrology. Built in 2006, the laboratory space allows accurate measurements of 3D data from devices operating at standoff distances from a few centimeters up to 10 meters. A laminar flow of 20°C air at 50% humidity level is maintained within ±0.1°C. The total volume of air in the lab is changed twice a minute (18 000 cfm). This characteristic combined with the air filtering design allows air cleanliness to be exceptionally good (Class 100).
Publication date
PublisherSPIE
LanguageEnglish
Peer reviewedYes
NRC numberNRCC 48797
NPARC number5764659
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4b1f6d5d-7e5b-4566-a0c3-c00a42f0e9ec
Record created2009-03-29
Record modified2020-01-30
Report a problem on this page
Date modified: