Water permeation through catalyst-coated membranes

From National Research Council Canada

Download
  1. (PDF, 636 KB)
DOIResolve DOI: https://doi.org/10.1149/1.3357339
AuthorSearch for: 1; Search for: 1; Search for: 1; Search for: 1; Search for: 1; Search for: 1; Search for:
Name affiliation
  1. National Research Council Canada. NRC Institute for Fuel Cell Innovation
FormatText
TypeArticle
Journal titleElectrochemical and Solid-State Letters
ISSN1099-0062
1944-8775
Volume13
Issue6
PagesB51–B54
Subjectcatalysis; desorption; permeability; proton exchange membrane fuel cells; water
Abstract
Water permeabilities, driven by concentration or pressure gradients, through NRE211 and catalyst-coated membranes are reported, and the effect of the catalyst layer (Formula thick, 30 wt % Nafion ionomer, carbon-supported Pt, 0.4 mg Formula ) on membrane water permeation is deconvoluted. For the system studied, water permeation is limited by the bulk membrane; the effect of the catalyst layer was insignificant and, despite catalyst layers being deposited on the membrane’s surface, it does not influence the rates of sorption or desorption at membrane interfaces.
Publication date
PublisherElectrochemical Society
LanguageEnglish
Peer reviewedYes
NPARC number23001990
Export citationExport as RIS
Report a correctionReport a correction
Record identifier38de042b-4512-4f66-80c9-98816a8eac50
Record created2017-07-13
Record modified2019-03-11
Report a problem on this page
Date modified: