| Author | Search for: Barrette, P. D.1ORCID identifier: https://orcid.org/0000-0002-0975-8884; Search for: Sinha, N. K.1; Search for: Michel, B. |
|---|
| Affiliation | - National Research Council of Canada
|
|---|
| Format | Text, Article |
|---|
| Conference | The 14th International Conference on Offshore Mechanics and Arctic Engineering, June 18-22, 1995, Copenhagen, Denmark |
|---|
| Abstract | Ice crystals reproduced serially from a common seed were machined into rectangular prisms and submitted to a constant load in a levertype compression apparatus. All crystals had their [0001] axis oriented parallel to a prismatic surface and at 45° with the load axis. The temperature at which deformation took place was -2°C and the stress levels were 300, 500, and 700 kPa. Three types of boundary conditions were investigated. A new design for transducer set-up is proposed which takes into account the high plastic anisotropy inherent to ice crystals. It is also suggested that the creep behavior of this material follows a polynomial form rather than power-law, as reported in previous investigations. |
|---|
| Publication date | 1995 |
|---|
| Publisher | American Society of Mechanical Engineers |
|---|
| In | |
|---|
| Note | Mr. Barrette and Mr. Sinha were affiliated with the National Research Council of Canada, Institute for Environmental Research and Technology when they authored this article. |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | 26b9f095-d646-42c5-ad62-1fab0b4d1bd7 |
|---|
| Record created | 2019-05-10 |
|---|
| Record modified | 2021-03-26 |
|---|
