| Link | https://railknowledgebank.com/Presto/pl/MTk4MTRjNDUtNWQ0My00OTBmLTllYWUtZWFjM2U2OTE0ZDY3LjI2NzQ= |
|---|
| Author | Search for: Sroba, Peter; Search for: Garg, Pradeep Kumar; Search for: Caldwell, Robert1ORCID identifier: https://orcid.org/0009-0007-2643-1078 |
|---|
| Affiliation | - National Research Council of Canada. Surface Transportation
|
|---|
| Format | Text, Article |
|---|
| Conference | 10th International Heavy Haul Association Conference - Capacity Building Through Heavy Haul Operations (IHHA 2013), February 4-6, 2013, New Delhi, India |
|---|
| Subject | rail grinding; rail life; detail fractures; rolling contact fatigue; rail wear; preventive grinding; preventive-gradual grinding; capacity building; increasing axle loads; safety; rail monitoring; gauge face lubrication; friction management; track maintenance; energy savings; welds; squats |
|---|
| Abstract | Indian Railways (IR) has implemented a preventive-gradual rail grinding program in 2011 on the South Central Railway (SCR) and North Central Railway (NCR) to improve passenger safety, increase railway capacity and reduce track maintenance costs, rail failures and speed restrictions. The National Research Council Canada, Surface Transportation (NRC-ST) was commissioned in 2009 by IR to train engineers in the gathering and assessment of data for the development of new wheel and rail profiles. NRC-ST used these data to engineer a wheel profile and four rail profiles. The design included two tangent profiles to promote uniform wheel tread wear. NRC-ST recommended a lubrication program to reduce high rail gauge face wear. NRC-ST conducted a school for IR engineers in July 2010 to train them in wheel/rail interaction and best practices in rail grinding and friction management. Field training was conducted in India for best practices in rail grinding implementation during the start up of the high-production rail grinders in early 2011. NRC-ST developed a grinding program based on the route-specific curvature and annual tonnage. The program began with accelerated preventive-gradual grinding at 25 million gross tonne (mgt) intervals for the first two cycles then changed to preventive grinding at 50 mgt intervals. The program detailed the target profile, the pattern, the grinding speed and the number of passes required for each curve and tangent segment. The laser profile measurement system and proprietary software on board the grinder measures the rail profile and selects the second and third pass grinding patterns for curves. Program results after the first year indicate that the rail grinding program has reduced wheel/rail impacts, rail/weld fatigue defects and rail and weld failures. Contact stresses have also reduced on areas of the rail where there was rolling contact fatigue (RCF). IR anticipates the grinding program will increase wheel and rail life and reduce maintenance costs for track components. Energy costs should also reduce due to the smoother rail surface, the elimination of hunting and improved curving. |
|---|
| Publication date | 2013 |
|---|
| Publisher | International Heavy Haul Association |
|---|
| In | |
|---|
| Language | English |
|---|
| Peer reviewed | Yes |
|---|
| Export citation | Export as RIS |
|---|
| Report a correction | Report a correction (opens in a new tab) |
|---|
| Record identifier | 14f11830-303d-4050-a0de-10eaa1a3beef |
|---|
| Record created | 2024-07-30 |
|---|
| Record modified | 2024-07-30 |
|---|
